Final fall, Silca launched their Tour de France Stage-winning hole 3D-printed titanium derailleur hangers to most people. However they have been principally restricted to riders with Shimano drivetrains or UDH-equipped bikes – severely limiting on-road functions. Properly, Silca listened. And after shortly promoting out these preliminary ti hangers, they’re again with common suits for 9 in style street & gravel bike makers. And the unique run can be found once more too.
Do you assume an $85-99 titanium alternative derailleur hanger will enhance your bike’s shifting?
Silca 3D-printed titanium derailleur hanger suits extra bikes
Developed as a challenge to enhance the shifting on WorldTour street bikes… a lighter, stiffer hanger improve promising sooner, extra exact shifts on your street, gravel, and mountain bikes…
Silca claims that “fashionable digital derailleurs shift so quick and with such drive that typical hangers made out of low-grade aluminum plates will flex as much as 4 levels throughout a shift, leading to much less exact, noisier, and slower shifting. Conventional hangers additionally bend simply, even in minor incidents, leading to pointless bike adjustments and extra workload for mechanics.“
For those who had a Shimano derailleur, these direct mount hangers promised sooner, extra exact shifting. Silca promised a whopping 8-10x greater stiffness when utilizing the direct mount ti hanger vs. a normal replaceable aluminum hanger and the additional hyperlink on the derailleur. On a UDH-compatible bike, they mentioned their hole 3D-printed titanium hanger was “5-6x stiffer than typical aluminum hangers”. We assume these quoted UDH features will apply to their new common match derailleur hangers for extra street and gravel bikes, too.
Feels like a no brainer improve, proper?
After all, the 3D-printed hanger is supposed to be a sacrificial factor that breaks earlier than your body does. However Silca assures that although their ti hangers are ultra-stiff, there’s nonetheless an inner construction designed to interrupt earlier than your body.
So, what’s new?
The brand new bit right here is, that Silca develop their providing for a similar 9 bike makers as earlier than. So, you possibly can both get a 100-series Shimano direct-mount-specific hanger. Or get a 200-series Common Match one which you need to use with SRAM, Campagnolo, MicroShift, TRP, Ingrid, or no matter you’ve gotten mendacity round…
Plus, there’s nonetheless the Shimano or Common Match possibility for UDH bikes.
And they’re all in inventory once more.
Or should you had a UDH-compatible body, you would use one with both any typical derailleur or a Shimano Direct Mount.
Silca 3D-printed derailleur hanger – Pricing, choices & availability
The Silca 3DP Derailleur Hanger is accessible to suit 9 manufacturers of bikes for $85 a bit. That then, consists of Cannondale, Canyon, Cervelo, Issue, Large, Pinarello, Scott, Specialised & Trek. Take a look at our unique Silca 3d-printed derailleur hanger article for a full breakdown of appropriate bike fashions.
Decide from 100-series for Shimano or 200-series for Common Match for SRAM, Campagnolo or different drivetrains. UDH-compatible hangers are additionally obtainable for $99 in Shimano-specific or Common Match.
Supply hyperlink
Excellent write-up
Outstanding feature
Excellent write-up
Insightful piece